You might want to rethink your walkway when you see what this clever homeowner did!

Our slate front walkway was in need of an update. The 2′ x 3′ slate flagstones had cracked in places and had shifted over the years, allowing weeds to invade. Fortunately, the stones were not mortared in so we were able to do this update on our own and much more quickly than I thought!

  • front walkway redo, concrete masonry
I measured the area of the total walkway and the area that the flagstones would cover to calculate the amount of paver base and pea gravel we’d need. First thing in the morning, we picked up our supplies from Lowe’s and then started by selecting the five best stones and hauling the cracked ones away.
  • front walkway redo, concrete masonry
  • front walkway redo, concrete masonry
Once the stones were removed, we used an edger and a flat spade to excavate the dirt down a few inches (approx. 2″ for the paver base and 1.5″ for the flagstones and pea gravel). We then added metal edging, which by sheer luck came in 8′ and 4′ lengths which we combined for our 12′ walkway.
  • front walkway redo, concrete masonry
To distribute the paver base, we placed the bags in a grid over the whole walkway area and then cut open the bags with the edger and dumped the base out.
  • front walkway redo, concrete masonry
We used a 10″ x 10″ tamper to pack down the base layer, then unrolled landscape fabric over the whole surface and used landscape staples to hold it in place. We used a recycled fabric made from soda bottles.
  • front walkway redo, concrete masonry
We placed and nudged the flagstones till they looked evenly distributed.
  • front walkway redo, concrete masonry
We filled in around the flagstones with pea gravel, hauled off the unused materials, replaced the mulch in adjoining beds, hosed the whole thing off and went and had a beer to celebrate!
  • front walkway redo, concrete masonry
UPDATE: It’s a month later and I just wanted to report on how the pea gravel has worked for us. It has gotten on the flagstones a bit here and there, and the walkway overall was not practical when we had a new refrigerator delivered. But other than that we’re very happy with the look and materials! Here’s an updated photo where the landscaping has grown in, the trim has been painted and we’ve added planted pots and new house numbers.

Materials I used for this project:

  • Paver base   (Lowes)
  • Pea gravel   (Lowes)
  • Metal edging   (Lowes)
  • Landscape fabric   (Lowes)
  • Landscape fabric staples   (Lowes)